|
Our Products
FloorShield
FloorArmor
Platinum200
PadTech's FloorShield
A standard noise-reducing underlayment for user with laminate, floating hardwood and engineered wood floors.
Noise Reduction & Moisture Protection
FloorShield has thousands of tiny sound pockets that help soften noises, and also provides moisture protection for laminate and other engineered floating floors.
Warranty
FloorShield will remain resilient and moisture resistant for the manufacturer's warrantied lifetime of the laminate or floating wood floor under normal use and conditions.
FloorShield can be used over most any type subfloor!
FloorShield is recommended for installation over most any type subfloor; and is especially suited for use over concrete. Concrete is naturally subject to moisture and humidity, which can severely damage laminate and wood flooring. FloorShield, with its visible moisture protection layer, will help prevent moisture from reaching - and possibly ruining - your new floor.
| FloorShield Specifications |
| Material |
100% Virgin Polyester Fiber |
| Color |
White |
| Weight |
1.21 oz/sq ft |
| Thickness |
0.093 inches |
| Sound |
69 IIC (Impact Insulation Class Rating ASTM E492-90)
Test results available upon request. |
| Density |
25.6 lbs. / cubic ft. |
| Flammabilty |
Meets or Exceeds Federal Flammabilty Standard (CPSC FF-170) |
Available in two roll sizes:
1. 3' x 33'3" (100 sq. ft.), approximately 7.7 lbs.
2. 6' x 75' (450 sq. ft.), approximately 35 lbs.
Back to Top
PadTech's FloorArmor
A premium noise-reducing underlayment for use with laminate, floating hardwood, and engineered wood floors.
Superior Noise Reduction
FloorArmor's high-density construction has thousands of tiny sound pockets that cushion the floor and deaden noises.
Ultimate Moisture Control
FloorArmor provides the best moisture protection in the industry.
Performance
FloorArmor is manufactured of 100% premium latex to offer the consumer a superior underlayment for use with laminate and other wood flooring products. Its high-density construction ensures the ultimate in noise reduction, moisture control. FloorArmor will also provide insulation, adding R-Value to the floor.
Warranty
FloorArmor will remain resilient and moisture resistant for the manufacturer's warranted lifetime of the laminate or floating wood floor under normal use and conditions in either above, on or below grade installations. (10lbs / 10002 / 24 hours)
FloorArmor can be used over most any type subfloor!
FloorArmor is recommended for installation over most any type subfloor; and is especially suited for use over concrete. Concrete is naturally subject to moisture and humidity, which can severely damage laminate and wood flooring. FloorArmor, with its visible moisture protection layer, will help prevent moisture from eaching - and possibly ruining - your new floor. FloorArmor also features a non-skid surface, and will not slip or slide during installation.
| FloorArmor Specifications |
| Material |
Mechanically Frothed SBR/Natural Latex Foam |
| Color |
White (color may vary) |
| Weight |
2.93 oz. / sq. ft. |
| Thickness |
0.075 in. |
| Density |
31.0 lbs. / cubic ft. |
| Moisture |
Water Resistance Hydrostatic Pressure (AATCC 127)
Exceeds 128 cm - No Penetration
Great for Radiant Heated floors |
| Sound |
71 IIC (Impact Insulation Class Rating ASTM E492-90)
Test results available upon request. |
| Flammabilty |
Meets or exceeds Federal Flammability Standard (CPSC-FF 1-70) |
Available in two roll sizes:
1. 3' x 33'3" (100 sq. ft.), approximately 18 lbs.
2. 6' x 75' (450 sq. ft.), approximately 80 lbs.
Back to Top
PadTech's Platinum200
A premium carpet cushion for use with residential and commercial carpets.
Features
- Insulation Properties
- Does not Support Mold, Mildew, or Fungus
- Can be used with Radiant Flooring Heat
- Greatly Improves Carpet Life in High Traffic Areas
Warranty
Platinum200 will remain resilient for the life of the carpet or 15 years under normal condition with proper installation.
Platinum200 can be used over most any type subfloor!
Platinum200 is recommended for installation over most any type subfloor including concrete and is especially designed for a double-glue installation. Platinum200 can be used for commercial or residential installations.
| Platinum200 Specifications |
| Material |
100% Virgin Polyurethane |
| Color |
Beige (color may vary) |
| Thickness |
0.200 in. |
| Density |
16 lbs. / cubic ft. |
Available in two roll sizes:
1. 6' x 75'
2. 12' x 75'
Back to Top
|
